LASERPIN FFP2 NR MASKS

Masks tested, manufactured and certified for the European Union
Available in white, black or color!

FFP2 FACE MASKS “LP4”

Following on from the success of the surgical mask line, LaserPin designed a second line of sanitary, filtering masks to protect against pathogens and light dust.

EU certified mask EN149:2001+A1:2009.

SEMI-FILTERING FFP2 MASK

As for the surgical masks, our FFP2 are 100% Made in Italy, using the same concept of comfort and an innovative shape. The choice of materials also follows the idea of a high quality product: 5 layers of soft, high-tech filter fabric.
Available in white, black or colours!

Over the past few months, masks packaging produced has had different wording and aesthetics to adapt to the different Government directives; this is shown on the front of the pack. The name and model of the masks is, on the other hand, stated on the back of the packaging: “Product Name LP3” or “Product Name LP4”.
This is to provide clarity and reassurance for all published information.
Regardless of Government directives about names or texts to express and alike, LaserPin has in fact produced the same mask, using the same ultrasonic production method and the same level of filtration i.e. ≥94%., in accordance to current laws&regulations on the matter.

BUY

Manufactured In Italy and Certified According to European Regulations

FFP2 mask is a category III PPE (Personal Protective Equipment). It is designed for protection against pathogens and light dust, according to (EU) standard EN149:2001+A1:2009.
Protection factor assigned to this PPE is equal to that recommended by the WHO for the use as protection against external pathogens.
In addition, our mask has been tested with sodium chloride aerosols and paraffin oil and has also been evaluated for its resistance, both in the breathing and exhalation phases, meeting the total requirements according to PPE certification; for the health and safety criteria inherent to FFP2
type masks.
Product also subject to the EU examination and conformity assessment procedure of the internal production control type.
Therefore, the product LP3, is certified by EUROFINS PRODUCT TESTING ITALY SRL, according to EN149:2001+A1:2009 (the certification can be downloaded at the bottom of this page).
Current LP4 product is instead certified by MTIC INTERCERT SRL, always according to EN149:2001+A1:2009 (the certification can be downloaded at the bottom of this page).
The product, with filtering technology, features 5 layers of high-tech materials, ensuring effectiveness, comfort and safety through a formula that guarantees low breathing resistance and, at the same time, high filtering performance.
Free of binders, latex, glue and fibreglass, its design is patented for greater facial comfort.

CERTIFICATIONS OF OUR FFP2 NR MASKS

EU LP3 EXAM CERTIFICATE

DOWNLOAD THE CERTIFICATE

EU LP4 EXAM CERTIFICATE

DOWNLOAD THE CERTIFICATE

INSTRUCTIONS FOR USE OF FFP2 HALF-MASKS

Below is the list of the correct procedures for the use of our protective masks:

  1. Open the mask;
  2. Put the mask on the nose;
  3. Hook the elastic bands behind the ears. Adapt the nose clip to fit wearer face;
  4. Lightly press the mask to obtain the best possible fit to the face;
  5. Breathe firmly. If air leaks are felt around the nose, reshape the nose clip to eliminate them;
  6. If air leaks are detected along the edge, adjust the elastic bands at the sides of the head
    until they are eliminated;

If you do not have a proper fit, DO NOT enter the area subject to contamination.

STORAGE, EXPIRY DATE AND DISPOSAL

During transportation, masks must be stored in their original packaging. The ambient must be cool and dry, with a temperature between -10 and 40 Celsius degrees, and the maximum humidity value to guarantee proper storage is 80%. The environment where they are stored must
not be dusty, must be away from heat sources and protected from sunlight.
The expiry date of the product is 2 years, and is stated on its packaging.
The product is classified for single use, it is not designed to be cleaned and disinfected, single-use only.

After use, if this product is not contaminated, it must be considered as general waste for disposal, otherwise it must be treated as infectious medical waste and therefore disposed of according to the law.

DECLARATION OF CONFORMITY

Click on the following buttons to view and, if necessary, download the LP3 and LP4 compliance statements

DECLARATION OF CONFORMITY – LP3
DECLARATION OF CONFORMITY – LP4

DO YOU NEED MORE INFORMATION? CONTACT US!